DataCard SR200, Руководство пользователя

Страница: 37 / 85

SR200 & SR300 Printer User Guide 33
Property tab
The Property tab shows:
• The version of printer firmware, and firmware
versions of any installed options such as a
laminator.
None or “ ???? ” means an option is
not installed or connected. For smart card, the
text shows what is supported, not what is
installed.
•
Configuration information for options installed.
• Counters:
— The Printer Total Counter, which is the
number of cards printed.
—
The Thermal Head Counter displays the
total number of printed sides for the
same head. The Head counter cannot be
reset; however, it automatically resets itself when the print head is replaced.
— Cleaning Counter displays the number of cards printed since the last cleaning
card.
— Printer Counter
displays the number of cards that have printed correctly. The Free
counter can be reset on the Status tab.
— Error Counter displays the number of cards that were not printed correctly. The
counter can be reset
on the Status tab.
Laminator tab
Not used at this time.
Printer Select tab
The Printer Select tab shows:
•
The currently selected printer.
•
The unit number. (Use the LCD panel to set
the unit number, described in
“Using the
Printer LCD panel” on page 44 .)
•
If more than one SR-CP printer is installed on
the PC, you can change the printer for which
information is displayed by choosing it from
the Current Printer list. The Status Monitor will
communicate with the printer to update
information.
•
Use the Scan button to locate another printer
if it is not displayed in the list. The printer and
Status Monitor support IPV4 which is
commonly used, and IPV6 which is a newer standard that uses longer addresses.
The choice affects which printers are found when scanning. Only printers on the
same subnet as the PC can be found.
•
Use the
Sync Time
button to send the current time on the PC to the printer.
•
Use the
Update
button to send changed values to the printer.