![background image](http://html.mh-extra.com/html/datacard/sr200/sr200_user-manual_511393050.webp)
46
SR200 & SR300 Printer User Guide
Speed
If installed, displays the value set using the Status Monitor.
See
“Bend Remedy tab” on page 31
for more information.
Heat Roller
HR Control
Enable
Disable
Displays the value set using the Status Monitor.
Power Saving
OFF or up to 60
minutes
Displays the value set using the Status Monitor.
Setting
Display
Counter
•
Total Cnt
•
Head Cnt
•
Free Cnt
•
Cleaning Cnt
•
Error Cnt
Use the up and down arrow keys to select the card counter type:
•
Total
is the default setting, and displays the number of
cards printed. The Total counter cannot be reset.
•
Head
displays the number of complete dye panels. The
Head counter cannot be reset, however, it automatically
resets itself when the print head is replaced.
•
The
Free
counter displays the number of cards that have
printed. The Free counter can be reset by the user.
Mode
Counter
Laminator Stat
Choose the information to display on the panel.
Contrast
0
Displays the LCD panel contrast using 7 gradations from
-3 (low contrast) to +3 (high contrast). The default setting is 0.
Buzzer
ON or OFF
Displays whether the electronic beep sound is ON or OFF.
The sound can indicate an error, when fewer than 20 cards
remain in the card hopper, or to confirm a menu selection.
Unit No
Choose from 1 to 10
Assign the unit number when more than one printer is
connected to a PC. Each unit attached to a PC must have a
unique number. After choosing the unit number, press the
Enter key and then the Exit key. “Please, power off” is
displayed on the LCD panel. Power the printer off and then
back on.
Option
MG
None
Lo-Co
Hi-Co
Displays the coercivity for writing data to ISO magnetic stripe
cards (if a magnetic stripe option is installed):
Lo-Co: 238 x 10
2
[A/m] (300[Oe])
Hi-Co: 218 x 10
3
[A/m] (2750[Oe])
IC Antenna
None
Installed
Displays whether the contactless card option is installed:
•
None for no antenna.
•
Installed when a smart card antenna is used.
IC Contact
None
ISO Type
Displays whether the contact card option is installed:
•
None for no contact.
•
ISO type if a contact card option is installed.
Menu Display
Settings
Function
Содержание SR200
