manualshive.com logo in svg

DataCard SR200, Руководство пользователя

Поделиться
Скачать
DataCard SR200 Скачать руководство пользователя страница 8

2                    

SR200 & SR300 Printer User Guide

About the Printer

The Datacard® SR200 & SR300 card printers use retransfer printing technology to 
produce high-quality, edge-to-edge printing on a variety of PVC and non-PVC card 
surfaces, including contact and contactless smart cards. The retransfer printing process 
uses two ribbon types –a color ink ribbon and a retransfer film. The ink ribbon is available 
in YMCK (Yellow, Magenta, Cyan, and Black) or YMCKK format. The printer uses these 
colors to print images on the retransfer film, and a heat roller to transfer the image onto a 
card. An ink ribbon with a peel-off (PO) panel is available, to remove retransfer material in 
areas of the card with a magnetic stripe, hologram, or smart card chip.The printer can also 
use YMCK ribbon with a UV retransfer panel.
The SR200 printer can print on one side of a card and the SR300 printer can print on both 
sides of the card. The SR300 printer can be equipped with optional magnetic stripe and 
smart card capabilities.

The outside of the SR200 & SR300 printers

Printer LCD Panel

Shows the printer status and any messages. Use it to view 

printer settings. Use the driver Status Monitor to change most 
printer settings.

Door Latch

Slide the latch to the right to open the printer door.

Printer Door

Open the door to access the ink ribbon and retransfer film 

cartridges.

Power Switch

Press the switch to power on the printer.

Card Hopper

Load blank cards. Consists of hopper and hopper cover.

Card Reject Slot

Cards for which the printer issued an error are ejected here. 

Fan Filter and Cover

Open to clean the fan filter and maintain card quality.

Port for Security Lock

Attach an optional security lock, such as a cable lock, in this 

location.

Lift Area 

Use this area to lift the printer when carrying.

Содержание SR200






















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды