![background image](http://html.mh-extra.com/html/datacard/sr200/sr200_user-manual_511393049.webp)
SR200 & SR300 Printer User Guide
45
Transport Mode
OK?
Set the Transport Mode when moving or shipping the printer.
Press the Return key to use the transport mode. “Please,
power off” is displayed on the LCD panel. The transport mode
is cancelled when the printer is powered back on.
See
“Preparing the printer for transport” on page 56
for
information on preparing the printer for transporting it.
Media
Ink Type
YMCK
YMCK-PO
YMCKK
YMCK-UV
Displays the types of ink ribbon and retransfer film that are
loaded in the printer. Press the Next key to scroll to the next
media type.
Datacard supports YMCK, YMCKK and YMCK-PO ink ribbons.
(The printer detects the type of ink ribbon; it cannot be set.)
See your dealer regarding support for YMCKUV ink ribbon.
Film Type
1000
Datacard retransfer film is available in 1000 frames per roll.
Card Thickness
Standard
Thin
Displays the thickness set using the Status Monitor. Standard
for 0.030 inch (0.76mm) thick cards or Thin for 0.010 inch
(0.25mm) thick cards. Set the Card Hopper for this thickness
also; see
“Adjust Card Thickness” on page 9
.
Contact your dealer or service provider before using 0.010in
(.0.25mm) thick cards.
YMC Level
Displays the value set using the Status Monitor.
Black level
Displays the value set using the Status Monitor.
Black mode
Displays the value set using the Status Monitor.
UV Level
Displays the value set using the Status Monitor.
PO Level
Displays the value set using the Status Monitor.
Retransfer
Temp Level
Displays the value set using the Status Monitor.
Speed (front)
Displays the value set using the Status Monitor.
Speed Front (UV)
Displays the value set using the Status Monitor.
Speed (back)
Displays the value set using the Status Monitor.
Speed (B-UV)
Displays the value set using the Status Monitor.
MG Peel Mode
Displays the value set using the Status Monitor.
Standby
Front Wait
Back Wait
Displays the value set using the Status Monitor.
Backside Cool
On
Off
Displays the value set using the Status Monitor.
Bend Remedy
Temp Level
Displays the value set using the Status Monitor.
See
“Bend Remedy tab” on page 31
for more information.
Menu Display
Settings
Function
Содержание SR200
