DataCard LM200, Руководство пользователя

Страница: 99 / 138

SR200 & SR300 Card Printers and LM200 & LM300 Laminators User’s Guide 89
16.
Replace the ink ribbon cartridge and initialize the supplies as described in “Initializing the Ink
Ribbon and Retransfer Film” on page 22 .
Clearing a Retransfer Section Jam
If a card jams in the retransfer section, Jam (Retransfer) is displayed on the LCD panel. To remove
the jammed card:
1.
Power off the printer.
2.
Open the printer door.
3.
Press the retransfer film cartridge release button and remove the retransfer film cartridge.
The card might be stuck to the film. Watch carefully to avoid jamming
the card when removing the retransfer film cartridge.
If you power up the printer and the Please Close Door displays, the
retransfer film cartridge is stuck. Push it back into the printer, close the
door, and return to step 2.
4.
Remove the card from the printer or from the retransfer film cartridge.
5.
If the card is stuck to the right of the heat roller, refer to “Clearing a
Transfer Jam” on page 87 .
6.
If the card is stuck near the retransfer heat roller, use the
supplied tweezers to remove the card, as shown.
7.
Replace the retransfer film cartridge and close the printer
door.
8.
Power on the printer.
9.
Press Reset . Card Jam Removed? displays on the printer
LCD panel.

Press Yes only if the card is removed.

Press No if the card remains inside the printer.
10.
Initialize the supplies. Refer to “Initializing the Ink Ribbon and Retransfer Film” on page 22 .
If the error still occurs, then a card is still jammed in the printer somewhere.
Caution:
Do not initialize the printer with the card
inside.