DataCard LM200, Руководство пользователя

Страница: 46 / 138

36 Printer and Laminator Settings
Printer Settings
On the Print tab, the “Enable printer settings” feature is available for administrator ‐ level users.
Refer to “Configuration Tab” on page 37 for more information about this setting. Click Settings to
open the Settings dialog box. The Settings dialog provides a convenient location to manage
settings provided on several tabs in the Status Monitor. Refer to “Printer Setting Tab” on page 42 ,
the “Retransfer Tab” on page 43 , or the “Bend Remedy Tab” on page 44 for more information
about the available settings.
Encode Tab
The Encode tab contains settings for using smart card
(IC) and magnetic stripe encoding. (Your ID software
might specify these settings, which override the
Encode tab.) You can also specify whether to turn
over the card after an encoding step.
Only options installed in the printer display in this
tab. Refer to Chapter 5: "Magnetic Stripe Encoding”
on page 81 for more information about encoding
magnetic stripes.
Refer to the Datacard SR200 & SR300 Plug ‐ in User’s
Guide for information on using Datacard ID software
applications to encode magnetic stripe onto cards.
Laminate Tab
The Laminate tab contains mode settings for the laminator,
if one is used. Three modes are available:

Default: Operates using the settings defined in the
Laminator tab of the Status Monitor.

Pass Through: Does not laminate the card.

Laminate: Laminates the card.