DataCard LM200, Руководство пользователя

Страница: 100 / 138

90 Error Recovery and Messages
Mending a Broken Ink Ribbon or Retransfer Film
If the ink ribbon or retransfer film breaks, Ink Search or Media Search is displayed on the LCD
panel. Broken ink ribbon is shown in the following example; repairing broken retransfer film uses
the same steps.
1.
Power off the printer.
2.
Open the printer door.
3.
Press the release button for the appropriate cartridge and remove the cartridge from the
printer.
4.
Trim the ends of the broken portions evenly.
Do not remove the used ink ribbon or film from the take ‐ up spool.
(Removing and then reinstalling the ribbon on the take ‐ up spool may
cause print quality issues for the next few cards.)
5.
Align the ends of the broken media evenly and apply tape to secure
them.
6.
Turn the take ‐ up spool counterclockwise until the mended portion is
wound onto the spool two or three turns.
7.
Make sure that the yellow panel aligns with the arrow on the
cartridge.
8.
Reinstall the cartridge into the printer until it clicks into position.
9.
Close the printer door.
10.
Initialize the supplies as described in “Initializing the Ink Ribbon and
Retransfer Film” on page 22 .