Data I/O PSV5000, Руководство пользователя

Страница: 17 / 176

■
System Description
□
Safety Systems
PSV5000 Owner’s Manual - 13 -
Socket actuators can still move down and up
S
AFETY
D
OOR WITH
I
NTERLOCKS
During operation, when the high-speed PNP head is processing devices,
the clear plastic doors at the workspace are closed to protect operators
from injury. Both doors have a safety interlock which stops gantry
movement if the operator forgets to first park the PNP head.
Normally, if the power is ON, the PNP head should be stopped in the
park position prior to opening a safety door.
WARNING: Possible collision hazard! The high speed and force of
the gantry can seriously harm anyone working inside the
workspace. When working within the machine workspace, moving the PNP
head must be the responsibility of only one qualified individual. All others
must stay clear of the machine controls to prevent injury to that person.
Ensure that a job is Paused or Finished, or the system power is OFF prior to
opening any safety doors.
WARNING: Shock hazard! Opening the safety doors stops
motion of the gantry only. It does not remove electrical power from the
machine or any optional equipment. Turn the main power OFF for safety
unless otherwise directed.
CAUTION: Possible product damage! Do not use solvents such as
acetone, lacquer thinner, mineral spirits, isopropyl alcohol, or any type
of abrasive compound on the safety doors. These products will damage the
safety door surfaces and ESD coating, and reduce visibility of the work area.
E
LECTROSTATIC
D
ISCHARGE
(ESD) P
RECAUTIONS
Devices (integrated circuits) are very sensitive to static, and could be
damaged by unintended electrostatic discharge while being handled.
The most effective way to prevent damage from ESD is to make sure a
common electric potential (ground) exists between a static-sensitive
device or component, its environment, and the operator.
Operators should wear an antistatic wrist strap (Data I/O part number
440-0021-001) connected to one of the grounding connections on the
Park Position:
The spot where the head
stops when a job is
paused or ended (near
the far right corner).
Home Position:
The far right corner of
the workspace where the
head travels to before
each job is started.
Tool Position:
Near the safety door for
easy access to the PNP
head.