3-03 Maximum Reference
Range:
Function:
Application
dependent*
[Application dependant]
Enter the maximum acceptable value for the remote reference. The Maximum Reference value and
unit matches the configuration choice made in par. 1-00
and par. 20-12
Ref-
erence/Feedback Unit
, respectively.
NOTE!
If operating with par. 1-00
set for Closed-loop [3],
par. 20-14
Maximum Reference/Feedb.
must be used.
3-10 Preset Reference
Array [8]
Range:
Function:
0.00 %*
[-100.00 - 100.00 %]
3-15 Reference 1 Source
Option:
Function:
Select the reference input to be used for the first reference signal. Par. 3-15
,
and par. 3-17
Reference 3 Source
define up to three different refer-
ence signals. The sum of these reference signals defines the actual reference.
This parameter cannot be adjusted while the motor is running.
[0]
No function
[1] *
Analog input 53
[2]
Analog input 54
[7]
Pulse input 29
[8]
Pulse input 33
[20]
Digital pot.meter
[21]
Analog input X30/11
[22]
Analog input X30/12
[23]
Analog Input X42/1
6 How to Program the Low Harmonic Drive
VLT HVAC Low Harmonic Drive Instruction
Manual
6-20
MG.16.A1.22 - VLT
®
is a registered Danfoss trademark
6
