9-70 Programming Set-up
This parameter is unique for LCP and fieldbus. See
parameter 0-11 Programming Set-up
Option:
Function:
Select the set-up to be edited.
[0]
Factory setup Uses default data. This option can be used
as a data source to return the other set-ups
to a known state.
[1]
Set-up 1
Edits Set-up 1.
[2]
Set-up 2
Edits Set-up 2.
[3]
Set-up 3
Edits Set-up 3.
[4]
Set-up 4
Edits Set-up 4.
[9]
*
Active Set-up Follows the active set-up selected in
9-71 Profibus Save Data Values
Option:
Function:
Parameter values changed via PROFIBUS are not
automatically stored in non-volatile memory.
Use this parameter to activate a function that
stores parameter values in the EEPROM non-
volatile memory, so changed parameter values
are retained at power-down.
[0]
*
Off
Deactivates the non-volatile storage function.
[1]
Store all
setups
Stores all parameter values for all set-ups in the
non-volatile memory. When all parameter values
have been stored, the selection returns to
[0]
Off
.
[2]
Store all
setups
Stores all parameter values for all set-ups in the
non-volatile memory. When all parameter values
have been stored, the selection returns to
[0]
Off
.
9-72 ProfibusDriveReset
Option:
Function:
[0]
*
No action
[1]
Power-on
reset
Resets the frequency converter upon power-up,
as for power-cycle.
[3]
Comm
option
reset
Resets the PROFIBUS option only, useful after
changing certain settings in parameter group
9-** Profibus, for example,
When reset, the frequency converter
disappears from the fieldbus, which may cause
a communication error from the master.
9-80 Defined Parameters (1)
Array [116]
No LCP access
Read only
Range:
Function:
0
*
[0 - 9999 ] This parameter displays a list of all the defined
frequency converter parameters available for
PROFIBUS.
9-81 Defined Parameters (2)
Array [116]
No LCP access
Read only
Range:
Function:
0
*
[0 - 9999 ] This parameter displays a list of all the defined
frequency converter parameters available for
PROFIBUS.
9-82 Defined Parameters (3)
Array [116]
No LCP access
Read only
Range:
Function:
0
*
[0 - 9999 ] This parameter displays a list of all the defined
frequency converter parameters available for
PROFIBUS.
9-83 Defined Parameters (4)
Array [116]
No LCP access
Read only
Range:
Function:
0
*
[0 - 9999 ] This parameter displays a list of all the defined
frequency converter parameters available for
PROFIBUS.
9-90 Changed Parameters (1)
Array [116]
No LCP access
Read only
Range:
Function:
0
*
[0 - 9999 ] This parameter displays a list of all the
frequency converter parameters deviating from
default setting.
9-91 Changed Parameters (2)
Array [116]
No LCP access
Read only
Range:
Function:
0
*
[0 - 9999 ] This parameter displays a list of all the
frequency converter parameters deviating from
default setting.
Parameter Descriptions
VLT
®
HVAC Drive FC 102
100
Danfoss A/S © 03/2015 All rights reserved.
MG11CE02
3
3
Содержание VLT HVAC Drive FC 102
Страница 1: ...Programming Guide VLT HVAC Drive FC 102 vlt drives danfoss com...
Страница 2: ......