13-44 Logic Rule Boolean 3
Array [6]
Option:
Function:
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] SL Time-out 3
[71] SL Time-out 4
[72] SL Time-out 5
[73] SL Time-out 6
[74] SL Time-out 7
[81] Dry Pump
[82] End of Curve
[83] Broken Belt
4.10.6 13-5* States
13-51 SL Controller Event
Array [20]
Option:
Function:
Select the boolean input (true or
false) to define the smart logic
controller event.
See
parameter 13-02 Stop Event
for
further descriptions of options and
their functions.
[0]
*
False
[1]
True
[2]
Running
[3]
In range
[4]
On reference
[7]
Out of current range
[8]
Below I low
[9]
Above I high
[16] Thermal warning
[17] Mains out of range
[18] Reversing
[19] Warning
[20] Alarm (trip)
[21] Alarm (trip lock)
[22] Comparator 0
[23] Comparator 1
[24] Comparator 2
[25] Comparator 3
[26] Logic rule 0
[27] Logic rule 1
[28] Logic rule 2
[29] Logic rule 3
[30] SL Time-out 0
[31] SL Time-out 1
[32] SL Time-out 2
[33] Digital input DI18
[34] Digital input DI19
13-51 SL Controller Event
Array [20]
Option:
Function:
[35] Digital input DI27
[36] Digital input DI29
[39] Start command
[40] Drive stopped
[42] Auto Reset Trip
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] SL Time-out 3
[71] SL Time-out 4
[72] SL Time-out 5
[73] SL Time-out 6
[74] SL Time-out 7
[81] Dry Pump
[82] End of Curve
[83] Broken Belt
13-52 SL Controller Action
Array [20]
Option:
Function:
Select the action corresponding to the SLC
event. Actions are executed when the
corresponding event (defined in
parameter 13-51 SL Controller Event
) is
evaluated as true. The following actions
are available for selection:
[0]
*
Disabled
[1]
No action
[2]
Select set-up 1 Changes the active set-up
) to set-up 1.
[3]
Select set-up 2 Changes the active set-up
) to set-up 2.
[10] Select preset
ref 0
Selects preset reference 0.
[11] Select preset
ref 1
Selects preset reference 1.
[12] Select preset
ref 2
Selects preset reference 2.
[13] Select preset
ref 3
Selects preset reference 3.
[14] Select preset
ref 4
Selects preset reference 4.
[15] Select preset
ref 5
Selects preset reference 5.
[16] Select preset
ref 6
Selects preset reference 6.
[17] Select preset
ref 7
Selects preset reference 7. If the active
preset reference is changed, it merges
with other preset reference commands
Parameters
Programming Guide
MG03N202
Danfoss A/S © 11/2015 All rights reserved.
87
4
4
