![background image](http://html1.mh-extra.com/html/danfoss/vlt-automationdrive/vlt-automationdrive_design-manual_507816123.webp)
130BB689.10
Illustration 7.3 Recommended Lifting Method, Frame Sizes F3,
F4, F11, F12 and F13
130BB753.10
Illustration 7.4 Recommended Lifting Method, Frame Sizes F8
NOTE
The plinth is provided in the same packaging as the
frequency converter but is not attached to frame sizes F1-
F4 during shipment. The plinth is required to allow airflow
to the drive to provide proper cooling. The F frames
should be positioned on top of the plinth in the final
installation location. The angle from the top of the drive to
the lifting cable should be 60
°
C or greater.
In addition to the drawings above a spreader bar is an
acceptable way to lift the F Frame.
Mechanical Installation - ...
FC 300 Design Guide
122
MG.33.BD.02 - VLT
®
is a registered Danfoss trademark
7
7
Содержание VLT AutomationDrive
Страница 1: ...MAKING MODERN LIVING POSSIBLE Design Guide VLT AutomationDrive ...
Страница 280: ...www danfoss com drives MG33BD02 130R0301 MG33BD02 Rev 2011 03 29 ...
Страница 281: ......