Daikin VRV S RXMQ10ARY1, Руководство по обслуживанию, Страница: 121 / 377

SiAF332111E Field Settings for Outdoor Unit (4/5 HP Models)
Part 5 Field Settings and Test Operation 115
Note(s)
2.2.3 Monitor Mode
Various Settings
The numbers in the No. column represent the number of times to press the SET
(BS2) button.
No. Setting item
LED display
Data display
H1P H2P H3P H4P H5P H6P H7P
0 Various setting
l h h h h h h
See the note
below.
Lower 6 digits
2 Low noise / demand address
l h h h h k h
3 Not used
l h h h h k k
4 AIRNET address
l h h h k h h
5 Number of connected indoor units
l h h h k h k
7
Number of connected zone units
(excluding outdoor and BS unit)
l h h h k k k
8 Number of outdoor units
l h h k h h h
11
Number of zone units (excluding
outdoor and BS unit)
l h h k h k k
Lower 6 digits
12 Number of terminal blocks
l h h k k h h
Lower 4 digits:
upper
13 Number of terminal blocks
l h h k k h k
Lower 4 digits:
lower
14 Error description (the latest)
l h h k k k h
Refer to error
code table on
Part 6.
15 Error description (1 cycle before)
l h h k k k k
16 Error description (2 cycle before)
l h k h h h h
20 Contents of retry (the latest)
l h k h k h h
21 Contents of retry (1 cycle before)
l h k h k h k
22 Contents of retry (2 cycle before)
l h k h k k h
25
Normal judgment of outdoor units
PCB
l h k k h h k
Lower 2 digits:
kh
Abnormal
hk
Normal
hh
Unjudgement
Selection of check item
Confirmation on check item
Press the MODE (BS1) button and
enter the monitor mode.
Press the SET (BS2) button and
select a check item according to the
LED pattern.
Press the RETURN (BS3) button to
display different data of check item.
Press the RETURN (BS3) button
and return to the initial status of
monitor mode.
∗
If you become unsure of how to
proceed, press the MODE (BS1)
button and return to the setting
mode 1.
1 Cool / heat unified address
l h h h h h k
H1P H2P H3P H4P H5P H6P H7P
Emergency operation /
backup operation setting ON
l h h k h h h
OFF
l h h h h h h
Te setting H
l h h h h k h
M
l h h h h l h
L
l h h h h h h