Daikin SUT06S3016-30, Руководство по эксплуатации

Страница: 60 / 99

PIM00413
11-6
■
PQ selection parameter
Normal mode
Setting mode
⑦Display and edit the data selection and its value
Data number selection
・・・・
The PQ selection
parameters are
P13〜P28
setting value
①
②
③
After 2 sec
After 2 sec
After 2 sec
or
After 2 sec
After 2 sec
After 2 sec
After 2 sec
After 2 sec
After 2 sec
After 2 sec
After 2 sec
After 2 sec
After 2 sec
After 2 sec
or
After 2 sec
or
After 2 sec
or
After 2 sec
or
After 2 sec
or
Pressure in high-pressure side ※１
Acceleration time setting
④
⑤
⑥
⑨
⑧
①
Press the key at the same time for 2 seconds
Flow rate in high-pressure side ※１
Pressure in low-pressure side
Flow rate in low-pressure side
Deceleration time setting
※1 Only single pump type
① Press the key at the same time in normal mode. It will switch to setting mode after about 2 seconds.
②
Please press the or key to select the displayed data number. Display will flash if the data number is
under selection.
③ Please press the key to determine the data number. The selected value will be displayed.
④
Each data symbol of PQ selection parameter and setting value are displayed alternately in about every two
seconds.