Daikin SUT06S3016-30, Руководство по эксплуатации

Страница: 80 / 99

PIM00413
12-16
12.6
Other functions
12.6.1
[P12: W_TM] Solenoid valve response delay time at the time of switching PQ selection
After switching the PQ pattern, it will change the pressure command or the flow rate command after a delay
determined by this parameter.
Please adjust it, if you want to change pressure or flow rate, and avoid the instability in switching solenoid valve.
PQ0
PQ1
PQ Nu mber
[P12: Solenoid valve response delay time]
Pressure
Co mmand
Flow rate
Co mmand
0
0
PH00
PH01
QH00
QH01
Display Sign Parameter name Range
Factory Default
Setting
Unit
P12 W_TM
Solenoid valve response
delay time
0.00 〜 9.99
0.00 sec
12.6.2
[P32: S_TM] and [P33: L_IN] Suppression of surge during start-up
When start from stopped state, increasing in the slope of the following command and output, the occurrence of
pressure surge will be suppressed.
・ Pressure command
・
Flow rate command
・ Motor output
Display Sign Parameter name Range
Factory Default
Setting
Unit
P32 S_TM Surge less start-up time 0.0
１〜
9.99 0.5 sec
P33 L_IN
Motor start initial response
gain
１〜 999 １ 0 −