Daikin SUT06S3016-30, Руководство по эксплуатации

Страница: 61 / 99

PIM00413
11-7
⑤
Press the or key to change the setting value. After changing the setting value, data symbol appears
about two seconds later.
⑥
Press key to to determine the data number. The next data number will be displayed.
⑦ Repeat ④ , ⑤ , ⑥
⑧ If press the key, it will switch to the data number selection screen . Until then, the parameter whose value
has changed holds the changed value .
⑨
If the deceleration time setting " dt. *" is setted, it will switch to the data selection screen .
Note
The parameter setting value of pressure or flow rate is limited as follows.
(1) High-pressure side pressure setting value ≥ Low-pressure side pressure setting value
(2) Low-pressure side flow rate setting value ≥ High-pressure side flow rate setting value
When the parameter setting value of High-pressure side pressure setting, Low-pressure side
pressure setting, Low-pressure side flow rate setting or High-pressure side flow rate setting
changes, if its setting value reaches the above conditions, every Low-pressure side pressure
setting value or High-pressure side flow rate setting value in (1) or (2) will be automatically
changed as follows.
(1) Low-pressure side pressure setting value = High-pressure side pressure setting value
(2) High-pressure side flow rate setting value = Low-pressure side flow rate setting value
■ Parameters and data display
Display
Order
Display Parameter name
1 High-pressure side pressure setting
2 High-pressure side flow rate setting
3 Low-pressure side pressure setting
4 Low-pressure side flow rate setting value
5 Acceleration time setting
6 Deceleration time setting
*The first digit displays the PQ selection number. It is displayed in hexadecimal (0 ~ F).