Daikin SUT06S3016-30, Руководство по эксплуатации

Страница: 66 / 99

PIM00413
12-2
Item Sign Name Operating range
Default
setting
Description Reference
P07 WN_M
Warning output
level setting
0 〜 2 0
Set the output signal at the time of
warning occurrence.
Please refer to " P08: Alarm output mix "
for more information.
12-10
P08 AMIX Alarm output mix
0: Individual
output
1: Integrated
output
2: Pressure switch
function
expansion
1
Select the output method and output
terminal of the alarm signal, pressure
switch signal and warning signal,
P08 P07 DO2 Contact output
0
ON: Normal
OFF: Alarm
1
ON: Normal
OFF: Alarm
ON
⇔
OFF:
Warning
0
or
2
2
ON: Normal
OFF: Alarm or
Warning
Pressure
switch
0
Alarm or
Pressure
switch
1
1
No output
Alarm or
Pressure
switch
or warning
The working pressure of the pressure
switch, which is set in: "P01: Pressure
switch" can be selected as follows.
P08
Working pressure of
"P01: Pressure
switch"
Unit
0 or 1
Fixed value [MPa]
2
The ratio of the
pressure setting of
each PQ number
[%]
*If you want to change the settings of
"P01: Pressure switch", it will be enabled
by turning on the power again.
12-10
P09 INIF
Return to default
setting
0: Invalid
1: Initialize P00 ~
P09
2: Initialize all
parameters
0
Set "1", or "2" and restore the power
again, the parameters will be initialized to
the factory setting value.
−
P10 H_TI Response gain 5
〜
999
Please
refer to
12-6
Table 1
Set the integration gain.
The smaller the value is, the faster the
response will be. And the surge pressure
is more likely to occur.
−
P11 M_VR
Acceleration
response gain
0
〜
500 0
In order to improve the responsiveness,
only adjust this parameter settings to
increase the proportional gain, during
acceleration.
The larger the setting value is, the shorter
the acceleration time becomes. But the
−