Daikin SUT06S3016-30, Руководство по эксплуатации

Страница: 69 / 99

PIM00413
12-5
Item Sign Name Operating range
Default
setting
Description Reference
P39 DO_S
Digital output
selection
0 〜 7 0
Setting the function of the signal to be
output from the digital output DO1.
0: PQ number switching completion
output
1: Motor running output
2: High-pressure side operation output
3: Temperature rise during operation
4: Pressure and flow rate coincidence
output
5: Pressure coincidence output
6: Flow rate coincidence output
7: Fully charged
12-10
P40 PL_D
Pump operation
selection
0: Disabled
1: High pressure
small capacity
operation selection
allowed
0
Allow the operation selection only in
small capacity high pressure operation
state.
When this parameter is set to "0", the
parameter "low-pressure side pressure
setting" can be set to "1".
By setting the parameter "low-pressure
side pressure setting" to "0", high-
pressure small-capacity operation is
selected.
Turn On the power again, the setting of
this parameter is enabled.
−
P41 PCMW
Pressure
coincidence
detection range
0
〜
99 [
％
] 5
Setting the pressure coincidence
detection range.
When the "P39: Digital output selection"
is "4,5", it will be valid.
12-11
P42 PCMM
The minimum
value of pressure
coincidence
detection
0
〜
99.9 [MPa] 0.1
Setting the minimum pressure of the
pressure coincidence detection.
When the "P39: Digital output selection"
is "4,5", it will be valid.
12-11
P43 QCMW
Flow rate
coincidence
detection range
0
〜
99 [
％
] 5
Setting the flow rate coincidence
detection range.
When the "P39: Digital output selection"
is "4,6", it will be valid.
12-11
P44 QCMM
The minimum
value
of flow
rate coincidence
detection
0
〜
99.9 [L/min] 0.2
Setting the the minimum value of flow
rate coincidence detection.
When the "P39: Digital output selection"
is "4,6", it will be valid.
12-11
P45 AC_F
AC fan motor
synchronization
0: Always
operation
1: Synchronized
operation
0
DIN1: It can start / stop the AC fan in
synchronization with the start / stop
signal.
12-17