Daikin SUT06S3016-30, Руководство по эксплуатации

Страница: 44 / 99

PIM00413
8-2
Drain port
Rc 3/8
Outlet port
Rc 3/4
Suction port
Rc 1
Anload port
Rc 1/2
●SUT00S6007-30,SUT00D4016-30,SUT00D6021-30
※Solenoid valve is not attached to
SUT00S6007-30.
●
About the filter
You must install filters in the suction side and the tank return line in this product. Please attach the suction filter
of 150 mesh to the suction side, and attach the return filter of 10 μ m to the tank return line. (25 μ m or less for using
under 7MPa)
Please keep the degree of hydraulic fluid contamination under NAS9 class.
●
Cleanliness of the hydraulic fluid
In order to maintain the cleanliness of the hydraulic fluid, please note the following matters.
・ Please ensure the distance between the suction port and the tank bottom (10cm or more).
・
Please ensure the distance between the suction port and the return port. Or put a baffle plate (partition plate).
・ Please install a filter (40 μ m or less) to the air breather.
・
Please design the oil tank and make sure the waste can not enter it from the outside.
DANGER
●
During piping, please make sure the bending radius of the hydraulic hose satisfy the manufacturer recommended
value. As for the hose fixing method, please follow the hose manufacturer recommended method.
CAUTION
● Please make sure the suction pressure is under -0.02MPa. If it becomes more than -0.02MPa, the flow rate may
reduce and the noise may become large.