Daikin SkyAir RZF-A Series, Руководство по обслуживанию

Страница: 43 / 213

SiME281906E Main/Sub Setting
Part 3 Remote Controller 38
3.4.2 Setting for BRC4C Series
The address for the wireless remote controller is set to 1 at the factory. To change the setting,
proceed as follows:
1. Press FILTER SIGN RESET button and INSPECTION/TEST button at the same time for 4
seconds to enter field setting mode. ( SETTING is indicated on the display.)
2. Press FAN button and select A or b . Each time the button is pressed, the display switches
between A and b .
3. Press UP button or DOWN button to select an address from 1-3 as same as the receiver.
Address can be set from 1-6, but the receiver does not work with addresses 4-6.
4. Press RESERVE button to confirm the setting.
5. Press INSPECTION/TEST button for 1 second to return to normal mode.
Field setting mode
Address
M u ltiple setting
UP bu tton
DOWN bu tton
FAN bu tton
RESERVE bu tton
FILTER SIGN RESET bu tton
INSPECTION/TEST bu tton