Daikin BRC1E71, Инженерные данные

Страница: 40 / 46

EDUS72-975 Installation Manual
BRC1E71 39
7.5 Power-on
3P243521-2B
12
English
Power-on
5.
Check for completion of indoor/outdoor unit wiring.
Ɣ
Ensure that covers have been replaced on electrical component boxes for both indoor and outdoor
Ɣ
units prior to restoring power
.
5-1
The following are displayed after power-on. “Checking the connection. Please stand by
.”
During above display
, the
backlight will not be available.
When 1 indoor unit is controlled by 2 remote controllers:
Be sure to set sub remote controller during above display
.
Press and hold 4 seconds or longer the Operation mode selector button of the remote controller to be set. When the display is changed from main remote controller to sub remote controller
, the setting is
completed.
Basic screen is displayed.
5-2
If sub remote controller is not set at power-on in the case of one indoor unit controlled by two remote controllers, “Error code: U5” is displayed in the connection checking screen. Select the sub remote controller by pressing the Operation mode selector button of either one of the remote controllers for 4 seconds or longer
.
If the basic screen is not displayed more than 2 minutes after “Sub RC” display
, shut of
f the power supply and
check the wiring.
NOTE
When selecting a dif
ferent language, refer to
12
.
Language
.
(See page 21.)
NOTE
<Main remote controller>
<Sub remote controller>
1
5-
Checking the connection. Please stand by
.
Of
f reminder
T
imer
Main RC
Checking the connection. Please stand by
.
Error Code U5
Main RC
1
5-
Checking the connection. Please stand by
.
Of
f reminder
T
imer
Main RC
Checking the connection. Please stand by
.
Error Code U5
Main RC
Press and hold 4 seconds or longer the Operation mode selector button of sub remote controller side.
Checking the connection. Please stand by
.
Of
f reminder
T
imer
Sub RC
<Basic screen>
2
5-
Set temperature
28
°C
Fan
Return
Press the menu button
<Basic screen>
2
5-
Set temperature
28
°C
Fan
Return
Press the menu button
01_EN_3P243521-2B.indd 12
8/27/2009 2:00:12 PM
English
11
Left button
(7)
Used to highlight items to the left of the
Ɣ
currently selected item. Display contents are changed to
Ɣ
previous screen per page.
On/Off button
(8)
Press once to operate, and press once again to stop. Operation lamp
(9)
Green lamp lights up during operation.
The
lamp will blink if an malfunction occurs.
Cancel button
(10)
Used to return to the previous screen.
Ɣ
Press and hold this button for 4 seconds or
Ɣ
longer to display service settings menu.
LCD (with backlight)
(1
1)
The backlight will illuminate for approximately 30 seconds by pressing any operation button.
Service Settings menu
T
est Operation
Maintenance Contact Field Settings Energy Saving Options Prohibit Buttons Min Setpoints Dif
ferential
Outdoor
unit AirNet Address
Error History Indoor Unit Status Outdoor Unit Status Forced Fan ON Switch Main Sub Controller Filter Indicator Brush/Filter Ind. Disable Filter
Auto Clean
∗
Depending on connected model
Ɣ
Operate the button while the backlight is illuminated. When one indoor unit is controlled by two remote controllers (main / sub) only the fi
rst
Ɣ
controller to be accessed by the user will illuminate it’
s backlight.
NOTE
Button menu display descriptions
4-2
Setting
Service Settings T
e
st Operation
Maintenance Contact Field Settings Energy Saving Options Prohibit Buttons Min Setpoints Dif
ferential
1/3
In the highlighted display (selected items) setting screen, button operation descriptions are displayed.
Highlighted display (selected items)
<Service Settings menu screen>
01_EN_3P243521-2B.indd 11
8/27/2009 2:00:12 PM