Daihen OTC Welbee WB-P320E, Руководство пользователя

Страница: 19 / 150

2-3
Chapter 2
Product Specification
and Configuration
S
PECIFICATION
P
RODUCT
S
PECIFICATION AND
C
ONFIGURATION
C
HAPTER
2
T I P S
• Figure of operation panel with all options is in the section "10.3 About option specification".
Refer to the section and operation manual of each option.
OP-AL
DC MIG (100 Ar)
Al/99 1.2/1.6 STANDARD (*3) -
Al/Mg 1.0/1.2/1.6 STANDARD (*3) -
Cu Si 0.8/1.0 STANDARD (*3) -
Cu Al 0.8/1.0/1.2 STANDARD (*3) -
DC
PULSE
MIG (100 Ar)
Al/99 1.2/1.6 (*2) -
Al/Mg 1.0/1.2/1.6 (*2) -
Cu Si 0.8/1.0/1.2 (*2) -
Cu Al 0.8/1.0/1.2 (*2) -
INCONEL 0.9/1.2 (*4) (*2) -
TITANIUM 1.0/1.2 (*2) -
OP-WAVE
DC WAVE
PULSE
MAG (20 CO
2
) G3Si1 0.8/1.0/1.2 (*2) -
MAG (10 CO
2
)
G3Si1 0.8/1.0/1.2 (*2) -
MIG (2 O
2
)
CrNi 0.8/1.0/1.2 (*2) -
CrNi (Ferr) 0.8/1.0/1.2 (*2) -
MIG (2.5 CO
2
)
CrNi 0.8/1.0/1.2 (*2) -
CrNi (Ferr) 0.8/1.0/1.2 (*2) -
MIG (100 Ar)
Al/99 1.2/1.6 (*2) -
Al/Mg 1.0/1.2/1.6 (*2) -
OP-STICK
DC TIG - - - - -
DC STICK - - - - -
*1: Note that the "collective" voltage adjustment may not meet the appropriate condition if a mixing gas other than those with
the following mixing ratios is used.
CO
2
: Carbon dioxide (CO
2
) 100 %
MAG (20 CO
2
) : Argon (Ar) 80 % + Carbon dioxide (CO
2
) 20 %
MAG (10 CO
2
) : Argon (Ar) 90 % + Carbon dioxide (CO
2
) 10 %
MIG (2 O
2
) : Argon(Ar) 98 % + Oxygen (O
2
) 2 %
MIG (2.5 CO
2
) : Argon(Ar) 97.5 % + Carbon oxygen (CO
2
) 2.5 %
MIG (Ar) : Argon (Ar) 100 %
*2: Available for applications either of "STANDARD" or "HIGH".
*3: For "STANDARD" mode, the standard mode or extended cable mode (extended mode of power cable) is available.
( 6.7.2.1
-
F1: Standard/Extended cable mode)
*4: LED flashes when 0.9 is selected.
Optional
WELDING
METHOD
GAS (*1) WIRE MATERIALS WIRE DIA. (mm) TRAVEL SPEED
Penetration
adjustment