Dahua DH-TPC-PT8320A, Руководство по эксплуатации

Страница: 93 / 172

88
6.2.5 IP filter
It can set the users who can have access to the device via IP Filter.

White list: Only the IP/MAC of users is in the white list, then can it have access to the device,
otherwise it won
’t have access to the device.

Black list: When the IP/MAC of users is in the black list, then other users can have access to the
device except the users on the black list.

It can only create white list or black list; you can
’t create both black list and white list at the same
time.

Users are not allowed to set the device IP/MAC as white list.

MAC verification is valid only when the device IP and the IP of user PC are in the same LAN.
Note:

MAC verification can only be limited according to the router MAC during the access of WAN.

White list
Step 1
Select
“Setup > Network >IP Filter” and the system will display the interface of “IP Filter”, which is shown
in Figure 6-30.
Figure 6-30
Step 2
Check corresponding box to enable white list or black list.

Add the IP/MAC of user into the white list.
1. Click
“Add IP/MAC” and the system will pop up a dialogue box of “Add IP/MAC”.
2. Configure IP address info, click
“Save”. Please refer to sheet 6-21 for more parameter details.
Parameter Note
IP Address Input the IP address of host which needs to be added.
IP Segment Input the start address and end address of the network segment which
needs to be added.
MAC Input the MAC address of host which needs to be added.
Sheet 6-21