Dahua DH-TPC-PT8320A, Руководство по эксплуатации

Страница: 117 / 172

112
Click to add rule.
Step 3
Double click new rules to modify
“Rule Name” and “Rule Type”.
Step 4
Click
“Draw Rule”, draw monitoring area in the monitoring image, click right mouse button to finish
drawing area.
Note:

In the state of drawing rule, click
“Clear” to delete the monitoring area which has been drawn.
Step 5
Select max or min size, click
“Draw Target’ and drag any angle of the filtering frame to zoom in or out to
proper size of the filtering frame.
Note:

It will trigger alarm only when the size of missing target is between two filtering frames

In the state of drawing rules, select
“Max Size” or “Min Size”, click “Clear” to delete the
corresponding rectangular frame.
Step 6
It is to set parameter,
“Last Period” means the shortest time from when the target is taken away from
the detection area to when it triggers alarm, please refer to sheet 6-31 for more parameter details.
Step 7
Click
“Save” to make config valid.
Global Config
Note:

Global config is divided into two parts which are visible and thermal; the config method of both is
similar. Here it is to take visual as an example to introduce the operations steps.

The hybrid bullet doesn
’t support preset, please neglect the step of preset selection during config.
Step 1
Select
“Setup > Event > Global > Thermal”. The system will display the config interface of “Thermal”.
The camera will quickly move to the corresponding location of the preset.
Step 2
Configure the global parameters.