Dahua DH-TPC-PT8320A, Руководство по эксплуатации

Страница: 19 / 172

14
Parameter Note
Protocol Match the PTZ protocol
Address
It is set as corresponding device address.
Note:
The address has to be in accordance with that of external PTZ,
otherwise it won’t control external PTZ.
Baud Rate It is to select baud rate used by device.
Data Bit The default is 8.
Stop Bit The default is 1.
Parity The default is null.
Sheet 3-1
3.1.2 Setting Function
Note:

It has completed protocol setting. Please refer to
“3.1.1 Setting Protocol” for more details of
protocol setting.

PTZ setting operates external PTZ, check the effect in the preview image of external PTZ but not in
the preview image of bullet camera.

The following functions are valid only when external PTZ is supported.
3.1.2.1 Scan
Scan means the camera scanning from left limit to right limit with a certain speed.
Step 1
Click
“PTZ” and select the rule as “Scan” in “PTZ Setting” area, which is shown in Figure 3-2.
Figure 3-2
Step 2
Click
“Set” button and the system will display the icon of
.
Step 3
Move to the left limit via direction button, click
“Set Left” to cnfirm the location of left limit.
Step 4
Move to the right limit via direction button, click
“Set Right” to confirm the location of right limit.
So far, you have completed the path setting of scan.