Dahua DH-TPC-PT8320A, Руководство по эксплуатации

Страница: 143 / 172

138
Parameter Note
Alarm Results

Average: it means average temperature contrast between two rules.

Max: it means max temperature contrast between two rules.
 Min: it means min temperature contrast between two rules.
Alarm
Conditions
It is to set alarm condition, which includes below, match and above.
Alarm
Threshold
Temperature
It is to set the threshold temperature of triggering alarm, you can select
0~550
℃
.
Sheet 6-44
6.6.2
Global
It can enable temperature switch, isotherm and color code.

After the temperature switch is enabled, the temperature rule is valid and the interface will display
the temperature rule which has been set.

Isotherm is mainly used to highlight the object in the image with high brightness, take medium
temperature as basic, both max and min temperature are fluctuation range, it is expressed by bright
color if it exceeds min temperature, the area which is lower than min temperature displays black
and white.

Color code is located on the right of the preview interface, which is used to display the color change
from the highest temperature to the lowest temperature.
Step 1
Select
“
Setup > Temperature > Global
”
and the system will display the interface of
“
Global
”
, which is
shown in Figure 6-73.