109
Step 1
Select
“Preset” and the camera will quickly move to the corresponding location of the preset.
Step 2
Click
to add rule.
Step 3
Double click the new rule to modify
“Rule Name” and “Rule Type”.
Step 4
Click
“Draw Rule”, draw monitoring area in the monitoring image, click right mouse button to finish
drawing area.
Note:
It needs some time and space from when the target appears to when it is confirmed, so it needs to
leave some space when drawing warning area, so do not draw the area near obstacle.
In the state of drawing rule, click
“Clear” to delete the monitoring area which has been drawn.
Step 5
Select max or min size, click
“Draw Target’ and drag any angle of the filtering frame to zoom in or out to
proper size of the filtering frame.
Note:
It will trigger alarm only when the size of target which crosses tripwire is between two filtering
frames
In the state of drawing rules, select
“Max Size” or “Min Size”, click “Clear” to delete the
corresponding rectangular frame.
Step 6
It is to set alarm parameters, please refer to sheet 6-30 and sheet 6-31 for more parameter details.
Parameter
Note
Rule Type
It is to set the rule of intrusion, you can select inside/cross and
cross/inside.
Direction
It is to set
“
Rule Type
”
including crossing area, it needs to set the direction
of crossing area, you can select enter, leave and enter&leave.
Max Target No.
It is to set
“
Rule Type
”
including inside area, it is to set the max target
number which is to trigger alarm in the area, it won
’
t trigger alarm when
the target number is more than the max target number which has been set
in the area.
Min Target No.
It is to set
“
Rule Type
”
including inside area, it is to set the Min target
number which is to trigger alarm in the area, it won
’
t trigger alarm when
the target number is less than the Min target number which has been set in
the area.
Last Period
It is to set
“
Rule Type
”
including inside area, it is to set the time from when
the target appears in the area to when it triggers alarm.
Report Interval
It is to set
“
Rule Type
”
including inside area, it is to set the interval of
alarm, and it means alarm for once when it is 0.
Sheet 6-31
Содержание DH-TPC-PT8320A
