Dahua DH-TPC-PT8320A, Руководство по эксплуатации

Страница: 120 / 172

115
Parameter Note
Track Mode
There are three track modes:

Visible Track
It always tracks in the visual channel.
 Thermal Track

It always tracks in the thermal channel.

Period Auto
It is to select corresponding channel to track according to the
period set by users.
Sheet 6-33
Step 3
Click
“Save” to make config valid.
6.4.2 Face Detection
It will trigger alarm when human face is detected in the monitoring image.
Step 1
Select
“Setup > Smart Thermal” > Face Detect” and the system will display the interface of “Face
Detect
”.
Step 2
It is to configure the rue of face detect.
Figure 6-52
1. Select max size or min size, click
“Draw Target” and drag any angle of the filter box to zoom in or
out to adjust the filter box to proper size.
Note:
It will trigger alarm only when the human face is detected between two filter boxes.