D-Link DGS-1510/ME Series, Справочное руководство

Страница: 7 / 654

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
3
..
?
cable_diag ports
cd
cfm linktrace
cfm loopback
clear
clear address_binding dhcp_snoop binding_entry ports
clear arptable
clear attack_log
clear cfm pkt_cnt
clear counters
clear ethernet_oam ports
clear fdb
clear igmp_snooping data_driven_group
clear igmp_snooping statistics counter
clear log
clear mac_based_access_control auth_state
clear mld_snooping data_driven_group
clear mld_snooping statistics counter
clear port_security_entry
config 802.1p default_priority
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
When entering a command without its required parameters, the CLI will prompt you with a Next possible
completions: message.
DGS-1510-28XMP/ME:admin# config account
Command: config account
Next possible completions:
<username>
DGS-1510-28XMP/ME:admin#
In this case, the command config account was entered with the parameter <username> . The CLI will then
prompt to enter the <username> with the message, Next possible completions: . Every command in the CLI has
this feature, and complex commands have several layers of parameter prompting.
In addition, after typing any given command plus one space, users can see all of the next possible sub-commands,
in sequential order, by repeatedly pressing the
Tab key.
To re-enter the previous command at the command prompt, press the up arrow cursor key. The previous
command will appear at the command prompt.
DGS-1510-28XMP/ME:admin#config account
Command: config account
Next possible completions:
<username>
DGS-1510-28XMP/ME:admin#config account
In the above example, the command config account was entered without the required parameter <username> ,
the CLI returned the Next possible completions: <username> prompt. The up arrow cursor control key was