D-Link DGS-1510/ME Series Скачать руководство пользователя страница 406

Страница: 406 / 654

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide

402

DGS-1510-28XMP/ME:admin# create mcast_filter_profile profile_id 2 profile_name MOD

Command: create mcast_filter_profile profile_id 2 profile_name MOD

Success.

DGS-1510-28XMP/ME:admin#

47-2

config mcast_filter_profile

Description

This command is used to add or delete a range of multicast IP addresses to or from the profile.

Format

config mcast_filter_profile [profile_id <value 1-24> | profile_name <name 1-32>] {profile_name <name 1-32>
| [add | delete] <mcast_address_list>}(1)

Parameters

profile_id

- Specifies the ID of the profile.

<value 1-24>

- Enter the profile ID value here. This value must be between 1 and 24.

profile_name

- Specifies a meaningful description for the profile.

<name 1-32>

- Enter the profile name here. The profile name can be up to 32 characters long.

profile_name

- Specifies a meaningful description for the profile.

<name 1-32>

- Enter the profile name here. The profile name can be up to 32 characters long.

add

- Specifies to add a multicast address.

delete

- Specifies to delete a multicast address.

<mcast_address_list>

- Enter a list of the multicast addresses to be put in the profile. You can either specify a

single multicast IP address or a range of multicast addresses using -.

Restrictions

Only Administrators, Operators and Power-Users can issue this command.

Example

To add the multicast address range 225.1.1.1 to 225.1.1.10 to the profile:

DGS-1510-28XMP/ME:admin# config mcast_filter_profile profile_id 2 add 225.1.1.1 - 225.1.1.10

Command: config mcast_filter_profile profile_id 2 add 225.1.1.1 - 225.1.1.10

Success.

DGS-1510-28XMP/ME:admin#

47-3

config mcast_filter_profile ipv6

Description

This command is used to add or delete a range of IPv6 multicast addresses to the profile.

Содержание DGS-1510/ME Series















































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DGS-1510/ME Series

Отзывы:

Похожие инструкции для DGS-1510/ME Series

Бренды по названию

Популярные бренды

D-Link DGS-1510/ME Series, Справочное руководство

Результаты поиска

Содержание DGS-1510/ME Series

Отзывы:

Похожие инструкции для DGS-1510/ME Series

Бренды по названию

Популярные бренды