D-Link DGS-1510/ME Series, Справочное руководство

Страница: 474 / 654

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
470
Chapter 57 PPPoE Circuit ID Insertions
Command List
config pppoe circuit_id_insertion state [enable | disable]
config pppoe circuit_id_insertion ports <portlist> {state [enable | disable] | circuit_id [mac | ip | udf <string
32>]}(1)
show pppoe circuit_id_insertion
show pppoe circuit_id_insertion ports {<portlist>}
57-1 config pppoe circuit_id_insertion state
Description
This command is used to enable or disable PPPoE circuit ID insertion function. When both port and global state
are enabled, the system will insert the circuit ID tag to the received PPPoE discover and request packet if the tag is
absent, and remove the circuit ID tag from the received PPPoE offer and session confirmation packet. The insert
circuit ID contains the following information: Client MAC address, Device ID and Port number. By default, Switch IP
address is used as the device ID to encode the circuit ID option.
Format
config pppoe circuit_id_insertion state [enable | disable]
Parameters
enable - Specifies to enable the PPPoE circuit ID insertion on the Switch.
disable - Specifies to disable the PPPoE circuit ID insertion on the Switch. This is the default.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the PPPoE circuit insertion state:
DGS-1510-28XMP/ME:admin# config pppoe circuit_id_insertion state enable
Command: config pppoe circuit_id_insertion state enable
Success.
DGS-1510-28XMP/ME:admin#
57-2 config pppoe circuit_id_insertion ports
Description
This command is used to configure port’s PPPoE Circuit ID insertion function. When the port’s state and the global
state are enabled, the system will insert the Circuit ID TAG to the received PPPoE discovery initiation and request