DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
85
conform
- (Optional) Specifies the action when a packet is mapped to the “green” color.
permit
- Permits the packet.
replace_dscp
- Specifies to change the DSCP of the packet.
<value 0-63>
- Enter the replace DSCP value here. This value must be between 0 and 63.
counter
- (Optional) Specifies the ACL counter. This is optional. The default is “disable”. The resource may
be limited so that a counter cannot be turned on. Counters will be cleared when the function is disabled.
enable
- Specifies that the ACL counter option will be enabled.
disable
- Specifies that the ACL counter option will be disabled.
exceed
- Specifies the action when a packet is mapped to the “yellow” color.
permit
- Specifies to permit the packet.
replace_dscp
- (Optional) Specifies to change the DSCP of the packet.
<value 0-63>
- Enter the replace DSCP value here. This value must be between 0 and 63.
drop
- Specifies to drop the packet.
counter
- (Optional) Specifies the ACL counter. This is optional. The default is “disable”. The resource may
be limited so that a counter cannot be turned on. Counters will be cleared when the function is disabled.
enable
- Specifies that the ACL counter option will be enabled.
disable
- Specifies that the ACL counter option will be disabled.
violate
- Specifies the action when a packet is mapped to the “red” color.
permit
- Specifies to permit the packet.
replace_dscp - (Optional) Specifies to change the DSCP of the packet.
<value 0-63>
- Enter the replace DSCP value here. This value must be between 0 and 63.
drop
- Specifies to drop the packet.
counter
- (Optional) Specifies the ACL counter. This is optional. The default is “disable”. The resource may
be limited so that a counter cannot be turned on. Counters will be cleared when the function is disabled.
enable
- Specifies that the ACL counter option will be enabled.
disable
- Specifies that the ACL counter option will be disabled.
delete
- Specifies to delete the specified flow_meter.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure a “two rate, three color” flow meter:
DGS-1510-28XMP/ME:admin# config flow_meter profile_id 1 access_id 1 tr_tcm cir 1000 cbs 2000
pir 2000 pbs 2000 color_blind conform permit counter enable exceed permit replace_dscp 60
counter enable violate drop
Command: config flow_meter profile_id 1 access_id 1 tr_tcm cir 1000 cbs 2000 pir 2000 pbs
2000 color_blind conform permit counter enable exceed permit replace_dscp 60 counter enable
violate drop
Success.
DGS-1510-28XMP/ME:admin#
6-6
show flow_meter
Description
This command is used to display the flow-based metering (ACL Flow Metering) configuration.
Содержание DGS-1510/ME Series
Страница 1: ......