DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
71
DGS-1510-28XMP/ME:puser# enable admin
Command: enable admin
PassWord:******
Success.
DGS-1510-28XMP/ME:admin#
5-28
config admin local_enable
Description
This command is used to configure the local enable password of administrator level privilege. When the user
chooses the “local_enable” method to promote the privilege level, the enable password of local device is needed.
When the password information is not specified in the command, the system will prompt the user to input the
password interactively. For this case, the user can only input the plain text password. If the password is present in
the command, the user can select to input the password in the plain text form or in the encrypted form. The
encryption algorithm is based on SHA-I.
Format
config admin local_enable {encrypt [plain_text | sha_1] <password>}
Parameters
encrypt
- (Optional) Specifies the password form.
plain_text
- Specifies the password in plain text form.
sha_1
- Specifies the password in SHA-1 encrypted form.
<password>
- (Optional) Enter the password for promoting the privilege level. The length for a password in plain-
text form and SHA-1 encrypted form are different.
plain-text: Passwords can be from a minimum of 0 to a maximum of 15 characters.
SHA-1: The length of encrypted passwords is fixed to 35 bytes long and the password is case-sensitive.
Restrictions
Only Administrators can issue this command.
Example
To configure the administrator password:
DGS-1510-28XMP/ME:admin# config admin local_enable
Command: config admin local_ebable
Enter the old password:
Enter the case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DGS-1510-28XMP/ME:admin#
Содержание DGS-1510/ME Series
Страница 1: ......
