D-Link DGS-1510/ME Series, Справочное руководство

Страница: 548 / 654

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
544
67-6 show snmp user
Description
This command is used to display information on each SNMP username in the group username table.
Format
show snmp user
Parameters
None.
Restrictions
None.
Example
To show SNMP user:
DGS-1510-28XMP/ME:admin# show snmp user
Command: show snmp user
Username Group Name VerAuthPriv
-------------------------------- -------------------------- -----------
initial initial V3 NoneNone
user123 group123 V3 MD5 DES
Total Entries : 2
DGS-1510-28XMP/ME:admin#
67-7 create snmp group
Description
This command is used to create a new SNMP group, or a table that maps SNMP users to SNMP views.
Format
create snmp group <groupname 32> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]] {read_view
<view_name 32> | write_view <view_name 32> | notify_view <view_name 32>}
Parameters
<groupname 32> - Enter the group name here. This name can be up to 32 characters long.
v1 - Specifies the least secure of the possible security models.
v2c - Specifies the second least secure of the possible security models.
v3 - Specifies the most secure of the possible.
noauth_nopriv - Specifies to support neither packet authentication nor encrypting.
auth_nopriv - Specifies to support packet authentication.