D-Link DGS-1510/ME Series, Справочное руководство

Страница: 69 / 654

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
65
DGS-1510-28XMP/ME:admin# show authen server_group
Command: show authen server_group
Group Name IP Address Protocol
--------------- --------------- --------
mix_1 10.1.1.222
10.1.1.223 TACACS
radius 10.1.1.224 RADIUS
tacacs 10.1.1.225 TACACS
10.1.1.226
xtacacs 10.1.1.227 XTACACS
Total Entries : 5
DGS-1510-28XMP/ME:admin#
5-20 create authen server_host
Description
This command is used to create an authentication server host. When an authentication server host is created, IP
address and protocol are the index. That means over 1 authentication protocol services can be run on the same
physical host. The maximum supported number of server hosts is 16.
Format
create authen server_host <ipaddr> protocol [tacacs | xtacacs | | radius] {port <int 1-65535> | [ key
[<key_string 254> | none]] | timeout <int 1-255> | retransmit <int 1-20>}
Parameters
<ipaddr> - Enter the server host IP address.
protocol - Specifies the host's authentication protocol.
tacacs - Specifies the protocol as TACACS.
xtacacs - Specifies the protocol as XTACACS.
- Specifies the protocol as .
radius - Specifies the protocol as RADIUS.
port - (Optional) Specifies the port number of authentication protocol for server host. Default value for
TACACS/XTACACS/ is 49. Default value for RADIUS is 1812.
<int 1-65535> - Enter the authentication protocol port number here. This value must be between 1 and 65535.
key - (Optional) Specifies the key for and RADIUS authentication. If the value is null, no encryption will
apply. This value is meaningless for TACACS and XTACACS.
<key_string 254> - Enter the or the RADIUS key here. This key can be up to 254 characters long.
none - Specifies that there is no encryption for and RADIUS authentication. This value is
meaningless for TACACS and XTACACS.
timeout - (Optional) Specifies the time in second for waiting server reply. The default value is 5 seconds.
<int 1-255> - Enter the timeout value here. This value must be between 1 and 255 seconds.
retransmit - (Optional) Specifies the count for re-transmit. This value is meaningless for . Default value
is 2.
<int 1-20> - Enter the re-transmit value here. This value must be between 1 and 20.