D-Link DGS-1510/ME Series Скачать руководство пользователя страница 573

Страница: 573 / 654

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide

569

Format

config sim_group [add <candidate_id 1-100> {<password>} | delete <member_id 1-32>]

Parameters

add

- Specifies to add a specific candidate to the group.

<candidate_id 1-100>

- Enter the candidate ID to be added to the group here. This value must be between 1

and 100.

<password>

- (Optional) Enter the password of candidate if necessary.

delete

- Specifies to delete a member from the group.

<member_id 1-32>

- Enter the member ID of the member to be removed from the group here. This value must

be between 1 and 32.

Restrictions

Only Administrators, Operators and Power-Users can issue this command.

Example

To add a member:

DGS-1510-28XMP/ME:admin# config sim_group add 2

Command: config sim_group add 2

Please wait for ACK !!!

SIM Configure Success !!!

Success.

DGS-1510-28XMP/ME:admin#

To delete a member:

DGS-1510-28XMP/ME:admin# config sim_group delete 1

Command: config sim_group delete 1

Please wait for ACK !!!

SIM Configure Success !!!

Success.

DGS-1510-28XMP/ME:admin#

68-6

config sim

Description

This command is used to configure the role state and the parameters of the discovery protocol on the Switch.

Содержание DGS-1510/ME Series















































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DGS-1510/ME Series

Отзывы:

Похожие инструкции для DGS-1510/ME Series

Бренды по названию

Популярные бренды

D-Link DGS-1510/ME Series, Справочное руководство

Результаты поиска

Содержание DGS-1510/ME Series

Отзывы:

Похожие инструкции для DGS-1510/ME Series

Бренды по названию

Популярные бренды