DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
2
Boot Procedure V1.00.001
-------------------------------------------------------------------------------
Power On Self Test ........................................ 100 %
MAC Address : 00-01-02-03-04-00
H/W Version : A1
Please Wait, Loading V1.00.018 Runtime Image .............. 100 %
UART init ................................................. 100 %
Starting runtime image
Device Discovery .......................................... 100 %
Configuration init ........................................ |
The Switch’s MAC address can also be found in the Web management program on the Switch Information (Basic
Settings) window on the Configuration menu.
The IP address for the Switch must be set before it can be managed with the Web-based manager. The Switch IP
address can be automatically set using BOOTP or DHCP protocols, in which case the actual address assigned to
the Switch must be known.
Starting at the command line prompt, enter the commands
config ipif System ipaddress
xxx.xxx.xxx.xxx/yyy.yyy.yyy.yyy
. Where the
x
’s represent the IP address to be assigned to the IP interface
named
System
and the
y
’s represent the corresponding subnet mask.
Alternatively, you can enter
config ipif System ipaddress xxx.xxx.xxx.xxx/z
. Where the
x
’s represent the IP
address to be assigned to the IP interface named
System
and the
z
represents the corresponding number of
subnets in CIDR notation.
The IP interface named
System
on the Switch can be assigned an IP address and subnet mask which can then be
used to connect a management station to the Switch’s Telnet or Web-based management agent.
DGS-1510-28XMP/ME:admin# config ipif System ipaddress 10.24.22.100/255.0.0.0
Command: config ipif System ipaddress 10.24.22.100/8
Success.
DGS-1510-28XMP/ME:admin#
In the above example, the Switch was assigned an IP address of 10.24.22.100 with a subnet mask of 255.0.0.0.
The system message
Success
indicates that the command was executed successfully. The Switch can now be
configured and managed via Telnet, SNMP MIB browser and the CLI or via the Web-based management agent
using the above IP address to connect to the Switch.
There are a number of helpful features included in the CLI. Entering the
?
command will display a list of all of the
top-level commands.
Содержание DGS-1510/ME Series
Страница 1: ......
