D-Link DES-3326S - Switch - Stackable, Справочное руководство по интерфейсу командной строки

Страница: 11 / 354

DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual
Introduction 11
The switch ’ s MAC address can also be found from the Web
management program on the Switch Information (Basic Settings)
window on the Configuration menu.
The IP address for the switch must be set before it can be
managed with the Web-based manager. The switch IP address can
be automatically set using BOOTP or DHCP protocols, in which
case the actual address assigned to the switch must be known.
The IP address may be set using the Command Line Interface (CLI)
over the console serial port as follows:
1. Starting at the command line prompt, enter the
commands config ipif System ipaddress
xxx.xxx.xxx.xxx/yyy.yyy.yyy.yyy. Where the x ’ s
represent the IP address to be assigned to the IP
interface named System and the y
’ s represent the
corresponding subnet mask.
2. Alternatively, you can enter config ipif System
ipaddress xxx.xxx.xxx.xxx/z. Where the x ’ s
represent the IP address to be assigned to the IP
interface named System and the z represents the
corresponding number of subnets in CIDR notation.
The IP interface named System on the switch can be assigned an
IP address and subnet mask which can then be used to connect a
management station to the switch
’ s Telnet or Web-based
management agent.