D-Link DES-3326S - Switch - Stackable, Справочное руководство по интерфейсу командной строки

Страница: 338 / 354

DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual
338 OSPF Configuration Commands
create ospf virtual_link
Parameters
<area_id>
−
A 32-bit number in the form of
an IP address (xxx.xxx.xxx.xxx) that
uniquely identifies the OSPF area in the
OSPF domain.
<neighbor_id>
−
The OSPF router ID for
the remote area. This is a 32-bit number
in
the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies
the remote area
’ s Area Border Router. The
router ID of the neighbor router.
hello_interval <sec>
−
Allows the
specification of the interval between the
transmission of OSPF Hello packets, in
seconds. Between 5 and 65535 seconds
can be specified. The Hello Interval, Dead
Interval,
Authorization Type, and
Authorization Key should be the same for
all routers on the same network.
dead_interval <sec>
−
dead_interval <sec>
−
Allows the specification of the length of
time between the receipt of Hello packets
from a neighbor router before the selected
area declares that router down. An
interval between 5 and 65535 seconds can
be specified. The Dead Interval must be
evenly divisible by the Hello Interval.
<password>
−
A case-sensitive password.
<key_id>
−
A previously configured MD5
key ID (1 to 255).
Restrictions Only administrator-level users can issue
this command.