Document Number: 002-10635 Rev. *I
Page
312 of 325
S6J3310/20/30/40 Series
Page
Section
Change Results
13
3: Product
Description
3.2. Product
Description
Feature: I2S
Error)
− I2S has its own PPU, but the function is fixed to disable.
Correct)
-
14
3: Product
Description
3.2. Product
Description
Feature: Multi-Functional Serial (MFS)
Error)
Some ports of MFS have the dedicated I/O for I
2
C.
See Port description list in detail.
When the voltage supply of I
2
C interface is 5.0 V, it cannot use the I/O cells of 3.3 V voltage supply for the I
2
C
terminal.
CTS/RTS is not mounted (hardware flow control is not supported for this series.)
Correct)
Only 2 ports of MFS have the dedicated I/O for I
2
C.
See I
2
C timing in 9.1.4.6 Multi-Function Serial in detail.
The I
2
C is not designed to be hot swappable.
CTS/RTS is not mounted (hardware flow control is not supported for this series.)
14
3: Product
Description
3.2. Product
Description
Feature: Hyper BUS I/F
Error)
The following register is not supported and cannot be used.
− Controller Status Register (HYPERBUSIn_CSR)
− Interrupt Status Register (HYPERBUSIn_ISR)
− Write Protection Register (HYPERBUSIn_WPR)
− Test Register (HYPERBUSIn_TEST)
Correct)
The following register is not supported and cannot be used.
− Controller Status Register (HYPERBUSIn_CSR)
− Interrupt Enable Register (HYPERBUSIn_IEN)
− Interrupt Status Register (HYPERBUSIn_ISR)
− Write Protection Register (HYPERBUSIn_WPR)
− Test Register (HYPERBUSIn_TEST)