9
Care and Maintenance
Cleaning the Clean Cover
After washing the clean cover, make sure to dry it completely before attaching it back on.
●
Not keeping the clean cover clean is one of the causes of rice taking on a smell while being kept warm. (Pull out the power cord first
and allow the cooker to cool before cleaning.)
●
Clean the main unit and the lid, in particular, the inner packing of the clean cover using a wrung out dish towel. Do not use benzene
or thinner to clean.
●
It’s possible for a film of starch from the rice to form on the clean cover, the lid, and the inner pot. This however does not pose any
health risks.
●
While cooking, a small amount of steam may be discharged from a side of the lid due to vaporization inside of the cooker.
1
Turn the handle to align “V" with "
▼
" as shown in the figure below. Then, hold the pressure packing of the clean cover and pull the
PUSH
button by pressing to detach and wash the pressure packing. (Detach the pressure packing after the main unit cools.)
※
The clean cover will not be detached until "V" aligns with "
▼
." If it is pressed forcibly, its part may be damaged.
PUSH
PUSH
PUSH
Clean Cover Detachment Button
PUSH
PUSH
PUSH
Pressure Packing
Clean Cover Detachment Button
2
Use a neutral kitchen detergent and a sponge to frequently
clean the cover. Dry and then wipe off excess moisture with
a dry dish towel. Using your fingers, push the packing in all
the way around during cleaning. Then, use the cooker. If the
pressure packing is detached from the clean cover, attach
the packing by fitting the seven packing bumps. (7 parts) (For
information on how to assemble the pressure packing, see
Page 10.)
Packing Bump
Cover Bump
3
Hold the inner packing and pull it out to the arrow direction to
detach the packing. Then, clean it.
4
Clean the inner packing with a neutral kitchen detergent and a
sponge, and remove moisture from it. As shown in the figure
below, fit the packing bumps into the groove in sequence. Then,
press and turn the inner and outer parts of the packing with
index fingers.
PUSH
PUSH
PUSH
5
Fit the bump of the clean cover into the lower prop and press
the upper part of the clean cover to attach the cover. If the clean
cover is attached upside down, it may be damaged. If the clean
cover is not properly attached, you will not be able to turn the
Lid Lock to the "close(
●
)" position.
PUSH
PUSH
PUSH
PUSH
PUSH
PUSH
Care and Maintenance
PA1000 Series_ENG_US-1.indd 9
2013-08-08 �� 11:23:11
Содержание IH PA1000 Series
