47
applications [1-11]
Where:
1:FTP 2:SSH 3:Telnet 4:SMTP
5:DNS 6:HTTP 7:POP 8:NNTP
9:IMAP 10:SNMP 11:HTTPS
Gateway(config-
application-No.)# source-ip-
range [A.B.C.D] [1-254]
[A.B.C.D] [1-254]
Specify the source IP address range of
the packets which will be denied by this
rule.
Gateway(config)# security
packet-filter lan [1-10]
[1-10]
Specify the entry number of lan packet
filter. This allows you to edit the rule table
for the LAN filter. The LAN filter will block
packets which are received by the
Residential Gateway from the private
network and match the pre-determined
condition of any entry in the rule table.
Gateway(config-lan-No.)#
active
Enable this LAN rule.
Gateway(config-lan-No.)#
destination ip [A.B.C.D]
[A.B.C.D]
Specify an IP address range for the LAN
filter to block packets whose destination IP
addresses are in this range.
Gateway(config-lan-No.)#
destination port-number [1-
65535]
[1-65535]
Specify the destination port number of the
packets which the LAN Filter will block.
Gateway(config-lan-No.)#
protocol [tcp | udp]
[tcp | udp]
Select
TCP
or
UDP
as the communication
protocol of the packets which the LAN
filter will block.
Gateway(config-lan-No.)#
source-ip-range [A.B.C.D]
[1-254]
[A.B.C.D] [1-254]
Specify an IP address range for the LAN
filter to block packets whose source IP
addresses are in this range.
Gateway(config)# security
packet-filter mac [1-10]
[1-10]
Specify the entry number of MAC filter.
This is allows you to edit the MAC filter
rules. The Residential Gateway will drop
packets which match the pre-determined
condition of any entry in this table.
Gateway(config-mac-No.)#
active
Enable this MAC rule.
Gateway(config-mac-No.)#
destination ip [A.B.C.D]
[A.B.C.D]
Specify the destination IP address of the
packets which will be denied by this rule.
Gateway(config-mac-No.)#
destination port-number [1-
65535]
[1-65535]
Specify the destination port number of the
packet which will be denied by this rule.
Gateway(config-mac-No.)#
mac-address
[aa:bb:cc:dd:ee:ff]
[aa:bb:cc:dd:ee:ff] Specify the MAC address of the packet
which will be denied by this rule.
Gateway(config-mac-No.)#
protocol [tcp | udp]
[tcp | udp]
Select
TCP
or
UDP
as the communication
protocol of the packets which the MAC
filter will block.
Gateway(config)# security
packet-filter wan [1-10]
[1-10]
This allows you to edit the WAN filter
rules. The WAN filter rule will block
packets which are received by the
Residential Gateway from the public
network and match the pre-determined
condition of the rule.