33
Gateway(config-
data/management/iptv/voip -1)#
no connection-type
Return connection type to default setting
Gateway(config-
data/management/iptv/voip -1)#
no dhcp
Return DHCP connection to default setting
Gateway(config-data-1)# no dns
Return DNS server to default setting.
Gateway(config-
data/management/iptv/voip -1)#
no ping-access
Disable Ping access function.
Gateway(config-
data/management/iptv/voip -1)#
no static-ip
Return Static IP connection to default
setting
Gateway(config-
data/management/iptv/voip -1)#
no vlan-id
Return VLAN ID to default setting.
Show command
Gateway(config-
data/management/iptv/voip -1)#
show
Show current WAN DATA interface status.
2.5.8 IPv6 Command
1. Set up DDNS service.
DDNS stands for
“Dynamic Domain Name Service”. It allows a host to bind with a permanent
domain name so the host can be found on the internet with this domain name. With DDNS, the
network administrator can access the Residential Gateway with a permanent domain name even if
it is often assigned different IPv6 addresses by DHCP. And users on the Internet can access the
server (such as the web service) on the private network by the domain name of the Residential
Gateway. They do not have to access the server by an IP address which is usually not as easy to
remember as a domain name.
Command
Parameter
Description
Gateway(config)# ipv6
ddns
Enable the DDNS service.
Gateway(config)# ip ddns
[freedns|dynv6]
[dyndns|noip.org] Select a registration server to which you already
registered a domain name.
Gateway(config)# ip ddns
authentication type
Specify IPv6 authentication type.
Gateway(config)# ip ddns
host-name
Enter the DDNS URL assigned by the DDNS
server.
Gateway(config)# ip ddns
password
Enter the password provided by the DDNS
server.
Gateway(config)# ip ddns
token
Specify IPv6 DDNS token issued by the vendor.
Gateway(config)# ip ddns
username
Specify the username provided by the DDNS
server.
No command
Gateway(config)# no ipv6 ddns
Return IPv6 DDNS to be disabled.