41
Gateway(config)#
management access-
control wan
Permit the computers to manage the
Residential Gateway from its WAN ports.
Gateway(config)#
management access-
control wan snmp
Gain the SNMP management access on
WAN port.
Gateway(config)#
management access-
control wan telnet
Gain the Telnet management access on
WAN port.
Gateway(config)#
management access-
control wan web
Gain the Web management access on
WAN port.
Gateway(config)#
management dhcp-
autoprovision
Enable DHCP auto-provision function.
Gateway(config)#
management web http-port
[HTTP_Port]
[HTTP_Port]
Specify the Internet socket port number
used by protocols of the transport layer of
the Internet Protocol Suite for the
establishment of host-to-host connectivity.
The default value is 80.
Gateway(config)#
management cwmp-agent
Enable CPE WAN Management Protocol
function.
Gateway(config)#
management cwmp-agent
apply
Submit your settings after you finish
configuring CWMP.
Gateway(config)#
management cwmp-agent
connection-request
password [password]
[password]
Specify the password for Connection
Request Server.
Gateway(config)#
management cwmp-agent
connection-request
username [username]
[username]
Specify the username for Connection
Request Server.
Gateway(config)#
management cwmp-agent
management-server
password [password]
[password]
Specify the password for Auto
Configuration Server.
Gateway(config)#
management cwmp-agent
management-server
username [username]
[username]
Specify the username for Auto
Configuration Server.
Gateway(config)#
management cwmp-agent
management-server url [url]
[url]
Specify HTTP address of the Auto
Configuration Server.
Gateway(config)#
management cwmp-agent
parameter-change notify
Enable or disable Periodic Information
function. It defines the time interval that a
piece of information will be sent after a
communication session is done.
Note:
If a communication session has
been incomplete for long time, the time