
40
1)# 6rd-tunnel action [auto |
manual]
Gateway(config- management -
1)# 6rd-tunnel manual boader-
relay [A.B.C.D]
[A.B.C.D]
Configure 6rd tunnel border relay IP
address.
Gateway(config- management -
1)# 6rd-tunnel manual mask-
length [0-32]
[0-32]
Specify IP mask length.
Gateway(config- management -
1)# 6rd-tunnel manual prefix
[a:b:c:d:e:f:g:h]
[a:b:c:d:e:f:g:h] Specify 6rd tunnel prefix IPv6 address.
Gateway(config- management -
1)# 6rd-tunnel manual prefix-
length [0-32]
[0-32]
Specify 6rd tunnel prefix length.
Gateway(config- management -
1)# 6to4-tunnel relay-router
[A.B.C.D]
[A.B.C.D]
Specify relay router IP address.
Gateway(config- management -
1)# link-local-only mtu [0 |
1280-1500]
[0 | 1280-1500] Unlimited or specify MTU length in byte.
No Command
Gateway(config)# no ipv6 wan-
interface management [1]
[1]
Clear management interface number.
Show Command
Gateway(config)# show ipv6
wan-interface
Display IPv6 WAN interface configuration.
Gateway(config)# show ipv6
wan-interface status
Display IPv6 WAN interface status.
2.5.9 Management Command
Command
Parameter
Description
Gateway(config)#
management access-
control lan
Permit the computers to manage the
Residential Gateway from its LAN ports.
Gateway(config)#
management access-
control lan telnet
Gain the Telnet management access on
LAN port.
Gateway(config)#
management access-
control lan web
Gain the Web management access on
LAN port.
Gateway(config)#
management access-
control lan snmp
Gain the SNMP management access on
LAN port.
Gateway(config)#
management access-
control source-binding
[A.B.C.D] [1-254]
[A.B.C.D] [1-254] Specify a range of IP addresses to enable
these IP addresses to manage the
Residential Gateway from the WAN port
Gateway(config)#
management access-
control source-binding any
The Residential Gateway can be managed
from its WAN port by any remote IP
address.