20
Company Name:
Display a company name for this Gateway. Use
“system-info company-name
[company-name]
” command to edit this field.
System Object ID:
Display the predefined System OID.
System Contact:
Display contact information for this Gateway. Use
“system-info system-contact
[sys-contact]
” command to edit this field.
System Name:
Display a descriptive system name for this Gateway. Use
“system-info system-
name [sys-name]
” command to edit this field.
System Location:
Display a brief location description for this Gateway. Use
“system-info system-
location [sys-location]
” command to edit this field.
Model Name:
Display the product
’s model name.
Host Name:
Display the product
’s host name.
DHCP Vendor ID:
Enter the Vendor ID used for DHCP relay agent function.
Firmware Version:
Display the firmware version used in this device.
M/B Version:
Display the main board version.
Serial Number:
Display the serial number of this Gateway.
Up Time:
Display the up time since last restarting.
Local Time:
Display local time.
2. Display or verify currently-configured settings
Refer to the following sub-sections.
“Interface command”, “IP command”, “User command”, “VLAN
command
” sections, etc.
3. Display interface information or statistics
Refer to
“Show interface statistics command” and “Show sfp information command” sections.
4. Show default, running and startup configurations
Refer to
“show default-setting copmmand”, “show running-config command” and “show start-up-
config command
” sections.
2.5.4 Advanced Command
Command
Parameter Description
Gateway(config)# advanced
apply
Apply all advanced configuration, it also
apply all WAN and VLAN configuration.
Gateway(config)# advanced
wan-mac [default | generation]
[default |
generation]
WAN MAC Address is set “Default”, each
WAN interface will shared the same MAC
Address except Data interface that has a