CSZ Norm-o-Temp 111Z, Руководство по эксплуатации

Страница: 36 / 50

Operation Manual NORM-O-TEMP
®
, Model 111Z
Page 36 of 50
(Quarterly
)
Hospital Control No.
Serial Number
Check When Completed
1. External cabinet in good condition. (No unusual dents or missing parts.)
2. All labels properly affixed.
3. Clean the unit’s exterior and vents. (See Section 5-3)
4. Quick disconnect couplings are tight, straight, and not leaking.
5. Power cord (no cuts or exposed wire) and plug (no bent or missing prongs).
6. Indicator lights are operative.
7. Drain and clean reservoir. See Section 5-1.
a. Check circulation through each male coupling with drain hose
8. Clean water filter. See Section 5-2.
9. Refill reservoir with distilled/sterile-distilled water. See Section 5-1.5
10. Check flow rate.
a. Flow rate: Minimum of 0.5 GPM (check both sets of fittings)
b. Pressure: Maximum of 10 PSI (check both sets of fittings)
11. Condition of blanket/pad(s), hoses, and couplings (check for leaks).
12. Check the low water safety. (See Section 5-1.4)
13. All readings should be under 300μa for 100V units (See Op/Tech Manual):
a. OFF Normal Polarity
b. OFF Reverse Polarity
c. ON Normal Polarity
d. ON Reverse Polarity
14. Check the high limit safeties (See Op/Tech Manual):
a.
Primary: 43.5°C ± 0.6°C (110.0°F ± 1.08°F).
b. Secondary: 44.5°C ± 0.6°C (112.0°F ± 1.08°F).
c. Independent Mechanical: 46.0°C ± 0.6°C (115.0°F ± 1.08°F).
15. Check the Power Interrupt Safety (See Op/Tech Manual).
16. Ground Integrity Check: Verify the case to ground pin resistance
(See Op/Tech Manual).
Signature of Inspector Date of Inspection
Figure 7. NORM-O-TEMP
®
Maintenance Checklist