CSZ Norm-o-Temp 111Z, Руководство по эксплуатации

Страница: 48 / 50

Operation Manual NORM-O-TEMP
®
, Model 111Z
Page 48 of 50
Recommended separation distances between portable and mobile RF communications
equipment and the NORM-O-TEMP
®
, Model 111Z
The NORM-O-TEMP
®
, Model 111Z is intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled. The customer or the user of the NORM-O-TEMP
®
, Model
111Z can help prevent electromagnetic interference by maintaining a minimum distance between
portable and mobile RF communications equipment (transmitters) and the NORM-O-TEMP
®
, Model
111Z as recommended below, according to the maximum output power of the communications
equipment.
Rated maximum
output power of
transmitter
W
Separation distance according to frequency of transmitter
m
150 kHz to 80 MHz
d = 1,2√P
80 MHz to 800 MHz
d = 1,2√P
800 MHz to 2,5 GHz
d = 2,3√P
0,01 0,12 0,12 0,23
0,1 0,38 0,38 0,73
1 1,2 1,2 2,3
10 3,8 3,8 7,3
100 12 12 23
For transmitters rated at a maximum output power not listed above, the recommended separation
distance
d
in meters (m) can be estimated using the equation applicable to the frequency of the
transmitter, where
P
is the maximum output power rating of the transmitter in watts (W) according
to the transmitter manufacturer.
Note 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.