CSZ Norm-o-Temp 111Z, Руководство по эксплуатации

Страница: 33 / 50

Operation Manual NORM-O-TEMP
®
, Model 111Z
Page 33 of 50
M. The hyper-hypothermia blanket/pad may be pre-warmed before positioning the patient.
To do so, operate the unit at desired temperature for about 25 minutes.
N. Place the patient on the hyper-hypo thermia blanket/pad.
O. If a top hyper-hypo thermia blanket/pad is to be used, cover with a dry sheet if necessary.
P.
Connect the blanket/pad to the NORM-O-TEMP ® unit following the procedure described in
Section 3-2.1.
Q.
If no top hyper-hypothermia blanket/pad is used, cover the patient with a top sheet
and/or blanket/pad. Patient preparation and bedside care are further described in Section
3-4.
NOTE:
If at anytime, power is removed from the unit without actuating the power switch (I/O
switch) a power fail alarm will activate and the Power fail symbol LED located on the front of the
unit will flash. To stop the alarm, restore power.
4-2.
Operating the NORM-O-TEMP ® System
The NORM-O-TEMP
®
system operates based upon the actual temperature of the circulating
water relative to the set point temperature. The NORM-O-TEMP
®
system heats and circulates
the water.
Given the many variables such as patient size, weight, or condition, there is no direct
relationship between the temperature of the circulating water and patient temperature. Both
water temperature and patient temperature should be closely monitored.