Page 80
RUNNER 8/
4
6
PROGRAM SUMMARY GUIDE
The following program summary is an abbreviated version of all the panel program addresses. This is intended as a
quick guide to finding a program address. In many address locations, there is a main address (e.g. “
P1E
”), then a sub
address (e.g. P1E “
1E
”). You must enter in the main address number, followed by the sub address, then you can
enter the actual data. The program addresses are in numerical order with page references beside them so you can
get more detailed information if required.
This Summary is split into 13 headings. These are;
1) Users -
Page 80
7) Zones -
Page 88
2) Miscellaneous Panel & Clock Settings - Page 82
8) Time Zones -
Page 91
3) Outputs -
Page 83
9) Dialler -
Page 91
4) Areas -
Page 84
10) Telephone Numbers -
Page 92
5) Keypads -
Page 86
11) SIA Report Codes -
Page 93
6) Zone Key-Switches -
Page 88
12) Panel Diagnostic & Default Options -
Page 93
13) IP Alarm Set-up -
Page 94
+++++Users+++++
Programming User Codes
P1E
1-2000E User Code 1-2000 -
Default for User Code # 1 (P1E1E) = 123 Codes can be 1-6 or 4-6 digits
.
Page 24
(where 1E = User Code #1 to 2000E = User Code #2000)
NOTE:
The 2000 Users can be keypad Code, Radio or Access key Users. They can be mixed but the Maximum is 2000 Users.
The User type MUST be set to “0” (P2E User# E) for a code to be entered at the above address
.
User Type (Code/Radio/Access Tag-Card)
P2E
1-2000E User # 1-2000 Type -
0 = Keypad Code User {PIN}
Page 24
(Default = 0)
1 = Radio User (Users 101-2000 only)
2 = Access Tag/Card User
3 = Both Code and Access Tag/Card User {Tag + PIN)
4 = Either Code or Access Tag/Card User {Tag or PIN}
User Area Assignment
P3E
1-2000E User # 1-2000 Area -
01-32 = Assigned to Area 1-32
Page 25
(Default = 1)
User Code Access Options
P4E
1-2000E Users 1-2000 Access Options
1 = Code can Arm Area
Page 25
(Default = 1,3,4)
2 = Code can arm Stay Mode
3 = Code can Disarm Area
4 = Code can disarm Stay Mode
5 = Code is a Security Guard Code
6 = Code will Arm Latchkey Mode
7 = User can reset Latched Egress Outputs
8 = Can View Event Memory
User Code Privileges
P5E
1-2000E Users 1-2000 Privileges
1 = User can Change their Code
Page 26
(Default User 1 = 2,3,4,5,6,7,8)
2 = User can Change All Codes
(Default User 2-2000 = All Off)
3 = User can Allow Access to Installer Mode/Edit all Codes
4 = User can Change Telephone Numbers
5 = User can Change the Clock
6 = User can Change DTMF Command Codes
7 = User can Learn New Radio Devices
8 = Spare
User Code Miscellaneous Options
P6E
1-2000E Users 1-2000 Misc Opts
1 = User is Excluded from Global trouble Reset
Page 26
Radio User Type
P7E
101-2000E Radio User 101-2000 Type
0 = General Pendant Type
Page 26
(Default = 0)
1 = Crow Freewave Pendant
21 = Ness Pendant
Radio User Privileges
P8E
101-2000E Radio Users 101-2000 Privileges
1 = Pendant Can Disarm at All Times
Page 27
(Default = 1)
2 = Pendant Causes Immediate Panic
3 = Pendant Causes Delayed Panic ( 1.5 Sec)
4 = Pendant only works during Entry Delay
5 = This User is a Duress Code (Users 21-100)
6 = Spare
7 = Spare
8 = Spare
